BANNER T18U SERIES EMITTER, 2 M CABLE

Item Specifications

• Series
  U-GAGE T18U
• Sensing Method
  Thrubeam Ultrasonic
• Mounting Style
  M18 Low-profile Right-Angle
• Control Type
  Discrete Control
• Features
  Emitter Unit Only Receiver unit must be ordered as a separate item. Dual range/dual resolution opposed mode May be wired for either of two resolution modes: NORMAL or HIGH. The modes are selected by the polarity of the supply voltage. Alignment indicator flashes at a rate proportional to the received signal strength. Highly immune to ambient sonic and electrical noise.
• Minimum Operating Range
  300mm
• Maximum Operating Range
  600mm
• Supply Voltage Details
  12 to 24VDC
• Frequency
  230 kHz
• Pulse Pro Output
  No
• Construction
  Patented T-style yellow PBT housing with black PBT back cover. Transducer housing is threaded M18 x 1. Mating jam nut is supplied for mounting. Acoustic face is epoxy reinforced. Circuitry is epoxy encapsulated.
• IEC/NEMA Protection
  IP67/NEMA 6P
• Temp Rating
  –40 °C to +65 °C
• Connection
  Cable
• Connection Details
  2m PVC 2-wire
• Other connection types
  Contact Ramco for Other Connection Options Available from Banner
• Item Weight
  0.34 lbs per EA